Although going back to the drawing board may be frustrating at times, it definitely has both its pros and cons. One of the main cons when it comes to this is a setback in production, this is because now you basically have to start fresh with certain parts that are being made, if the part […]
Discipline: Engineering - Electronic Engineering
Discussion Reply: how are sequential circuits different from combinational circuits?Discussion Reply: how are sequential circuits different from combinational circuits?
Discuss the difference between latches and flip-flops. Latches and flip-flops are both bistable devices used for temporary data storage. Both devices can have active low or active high inputs. A latch determines its output from its input signals only, while a flip-flop is triggered by a timing or enable input. The timing input on […]
Discussion Reply: additional pros and cons where further consideration on the design process can be addressed.Discussion Reply: additional pros and cons where further consideration on the design process can be addressed.
I am going to discuss a “back to the drawing board ” design from Kansas City Missouri. It was constructed in 1972- 1974. The Kemper arena in 1979 during a heavy rainstorm had a major infrastructure compromise when the roof collapsed due to inadequate drainage infrastructure and poor bolting techniques. Thankfully the building was […]
Discussion Reply: additional pros and cons where further consideration on the design process can be addressed.Discussion Reply: additional pros and cons where further consideration on the design process can be addressed.
Find an example of “back to the drawing board” due to design failure or the need to improve a design. Summarize the issues you found. Hello, This might be one of the most “back to the drawing board” inventions there is. Some historians believe there are over 20 inventors of the incandescent lamps up […]
Discussion Reply: how would you show that the characteristic equation for the complement output of a JK flip-flopDiscussion Reply: how would you show that the characteristic equation for the complement output of a JK flip-flop
Discuss the difference between latches and flip-flops: The biggest difference I took away from latches vs. flip-flops, is that a latch does NOT have a clock signal, but a flip flop will always have a clock signal. Another difference between the two is that latches are “asynchronous” and flip-flops are just synchronous. (dept-info.labri.fr) This […]
how are sequential circuits different from combinational circuits?how are sequential circuits different from combinational circuits?
In your own words you may have include some logic circuits with analysis related to some of the topics.
Add Abstract, Introduction and Conclusions to the labAdd Abstract, Introduction and Conclusions to the lab
Abstract A brief description of the experiment. The abstract should not exceed four or five sentences. Introduction In your own words, explain the reason for performing the experiment and give a concise summary of the theory involved, including any mathematical detail relevant to later discussion in the report. Conclusions This section should reflect your […]
Multisim CircuitMultisim Circuit
Construct the Multisim circuit shown in Figure 2 (top) using components listed in parts list for J-K flip-flop. Change inputs preset and clear as shown in Figure 2 (bottom) and observe outputs Q and Q’ using digital probes. Write down results using Table 3. J-K flip-flop: 1 – J-K flip-flop 1 – 1 KOhm […]
“Back to the drawing board.” The Challenger Tragedy“Back to the drawing board.” The Challenger Tragedy
https://www.spaceline.org/united-states-manned-space-flight/challenger-legacy-index/the-challenger-tragedy/ You’ve heard the saying, “Back to the drawing board.” Ever think of where it came from or why it has become an idiom? Do some research and find out the origin of the idiom “Back to the drawing board” and how it relates to engineering. In your original post, answer the following: Find […]
Discussion: Latches and flip-flops are considered as sequential circuits and can act as data storage devices.Discussion: Latches and flip-flops are considered as sequential circuits and can act as data storage devices.
Latches and flip-flops are considered as sequential circuits and can act as data storage devices. In this discussion let’s learn about major differences between latches and flipflops. We are also going to discuss major applications where flipflops are and why. In your original post, answer the following: Discuss the difference between latches and flip-flops. […]